Leica iCON build: Earthworks & building site preparation
Minimise the manual and finish work faster with digital construction applications for layout, excavation, piling, checks and more
Leica iCON build and build plus bring digital construction and all its benefits to your earthworks and building site preparation work, regardless of the project size or the Leica iCON tools you use. Digitise and update designs to reflect true site conditions, layout quickly and accurately with 3D guidance, calculate volumes, define grades and slopes and check the finished product against the design – all faster and with full traceability.
Specjalizujesz się w budownictwie ciężkim lub sterowaniu maszynami?
Odkrywaj „rozwiązania z gruntu proste” na każdym etapie projektu budowlanego
Steps to achieve improved piling and building site preparations
Resect Engineering Ltd., a UK based site engineering and surveying service provider, show how they improved efficiency and accuracy of piling and groundwork tasks by using the Leica iCON iCR70 with Leica iCON build software.
Prepare with digital plans
As an earthworks contractor, why should you be bound by inflexible paper plans and manual calculations that slow construction site preparation? The Leica iCON Sketching app lets you digitalise plans quickly, create points, lines, arcs, prepare piling positions and more, and adapt the data to real site conditions. Be ready for layout and excavation faster, with design accuracy that results in less rework.
Digital tools streamline layout
The Leica iCON build Layout Points and Lines app delivers the data you need to finish earthworks and site prep layout tasks quickly and accurately. Navigate to points in map view with guidance that identifies the next nearest point. Mark areas like footings, pits, and foundations for excavation, easily set upward and outward offsets, ensure correct pit heights and more. Altogether, this means quicker calculations, adaptations, layout and checks, saving you time and eliminating costly rework.
Define and dig with confidence
When digging piling, accurate calculations paired with visuals and guidance help ensure you get it right the first time. The iCON build Slopes app enables you to define grades for excavations with simple slope definitions in percentage or degree ratio, install slope indicators on embankments, indicate inclination for foundation piling and more. You also benefit from visuals with top and cross-section views and easy navigation to correct elevation and position in sloped terrain.
Are you looking for a simple solution to increase the efficiency of your earthmoving machines? With the Leica iCON site excavator app, you have the flexibility to measure an area, create a design, and directly dig according to that design – all with the same field controller in the excavator cab. By using the iCON excavator site solution, achieve independence from surveyors and their busy schedules.
On-site calculations, comparisons, checks and reporting
Speed up reporting and billing with iCON build apps that make volume calculations, surface comparisons, and as-built checks easy and flexible, directly in the field. Calculate volumes independent of size and shape and apply the compaction factor for your material. Check ground levels anywhere on the design surface, balance cut and fill for optimised machine and material use and customise reports on-site.
Zminimalizuj poprawki, aby osiągnąć cele zrównoważonego rozwoju i zapewnić sukces projektu budowlanego
Dowiedz się, jak zmniejszyć liczbę poprawek dzięki portfolio produktów Leica iCON
Leica iCON iCR70
Mid-range construction robotic total station for general layout applications.
- Layout lines for footings, pits and foundations for excavation
- 80% increase in productivity over other conventional layout practices
- 4-button keyboard for simple operation
Leica iCON iCR80
The ultimate construction total station to maximise efficiency on site.
- Ability to layout complex designs
- Especially useful in congested sites with many distractions
- Control a wide variety of construction machines, such as graders or dozers
Leica AP20 AutoPole
A revolutionary smart system for Leica robotic total stations.
- A true digital construction workflow by removing the last analogue step in the process, the pole
- Faster and more reliable layout with less mistakes
- Delivers a true digital construction workflow using TargetID, PoleHeight, Tilt Compensation features
Leica iCON gps 70 T
Speed up – anytime, anywhere with the iCON gps 70 Smart Antenna.
- Permanent tilt compensation and resistance to magnetic interferences
- No need to hold the pole vertical and level the bubble when measuring
- Rugged aluminium housing and IP66 / IP68 protection for the harshest site conditions
Leica iCON gps 160
The Smart Antenna that balances functionality, flexibility and ROI in a way no one else can!
- Flexibility and ability to support a variety of daily building site tasks
- A large display with clear navigation for quick and easy setup, without additional hardware
- Allows measuring and stakeout with a tilted pole
VIEW PRODUCT
Leica iCON gps 30
Designed to facilitate the shift from traditional measurement methods to modern digital.
- The ultimate entry-level antenna for digital construction workflows
- An exceptionally lightweight and compact GNSS RTK rover, built with the operator in mind
- The highest level of position reliability in its class
VIEW PRODUCT
Leica iCON CC200
A high-durability controller for the most demanding on-site requirements.
- The ideal solution for all on-site positioning and measuring tasks, including on-machine applications
- Ready to withstand even the toughest site conditions, featuring ‘rain’ and ‘glove’ modes
- Large 10’’ screen with more map visibility
VIEW PRODUCT
Leica iCON CC180
A well-rounded and compact controller for all construction tasks.
- Display with a comprehensive work view for increased productivity
- Intel 12th Generation processor to swiftly load and process large and complex designs swiftly
- Finger/rain, glove or stylus operation modes
- Excellent connectivity with up to 500 m when operating with a Leica iCON total station
VIEW PRODUCT
Leica iCON CC170
The ideal field controller for customers seeking a versatile, lightweight and small-sized field controller.
- Full-LTE support and one modem for all regions
- Optional Long-range Bluetooth® allowing connectivity and operation up to 600 m away from the total station
- Hot-swappable batteries, eliminating the need to stop and save your work or quit applications when the battery needs changing
VIEW PRODUCT
Leica MC1 - 3D System
Leica MC1 represents the one-for-all software platform to guide and automate all heavy construction machines by consolidating all machine applications.
- Semi-automatic functionality to perform complex excavation tasks such as slope creation and trenching faster and more accurately
- Automatic Tool Recognition for more convenience and efficiency
- Surface logging syncing to ConX 3D page for progress tracking, reporting, volume calculations and model creation
VIEW PRODUCT
Leica iCON site excavator - 3D System
The Leica iCON site excavator is a simple, easy-to-use machine-control solution for optimising the earthmoving jobs of compact excavators.
- Versatile, as the software and field controller can also be used for off-machine applications
- Supports the swing boom, tilt rotator and tilt bucket functionalities of compact excavators
- The solution hardware (iCON gps 100 and CR50) is compact to perfectly fit smaller scale excavators
VIEW PRODUCT
Leica iCON iXE2 - 2D
The system allows multiple elevations and slopes to be constructed at any orientation, without resetting the machine or laser height reference.
- High-accuracy automatic dual slope and level control
- Real time cut/fill indication on the graphic display
- Precise sculpting of edges, slopes and contours by support of tilt rotator attachments
VIEW PRODUCT
Przyspiesz pracę na budowie dzięki tyczce Leica AP20 AutoPole
Leica AP20 AutoPole – najinteligentniejsza tyczka na świecie.
Leica AP20 AutoPole – najinteligentniejsza tyczka na świecie.
Key to keeping up with construction industry trends
Aregger AG takes us through their ten-year journey with Leica iCON construction solutions.
Aregger AG takes us through their ten-year journey with Leica iCON construction solutions.
Start your digital construction journey with manual total stations
Digitalize your construction workflow, improve precision, and simplify your projects with manual total stations by Leica Geosystems.
Digitalize your construction workflow, improve precision, and simplify your projects with manual total stations by Leica Geosystems.
